Tutor
•
4 Messages
DVR
When set to record from the 'Guide', the recording starts a minute or two late, and finishes a minute or to late. Is there a way to have it more accurately start and stop, or make it start a couple minutes early?
Tutor
•
4 Messages
When set to record from the 'Guide', the recording starts a minute or two late, and finishes a minute or to late. Is there a way to have it more accurately start and stop, or make it start a couple minutes early?
Accepted Solution
Official Solution
aviewer
Expert
•
10.1K Messages
10 years ago
0
0
aviewer
Expert
•
10.1K Messages
10 years ago
0
0
RCSMG
Expert
•
23.3K Messages
10 years ago
The only other alternative you have if there is no recording conflict is to set up a Manual Recording. That way you can set the time you want the recording to start and end.
0
0
sj98ta
Tutor
•
4 Messages
10 years ago
There was certaintly no conflict. It certainly is not starting early, and instead consistently starts a minute of two late, no matter what I'm trying to record.
0
0
aviewer
Expert
•
10.1K Messages
10 years ago
Try rebooting the RG & DVR by pulling the plug for 30 seconds. Let the RG stabilize before replugging the DVR.
How does the time look after that?
If problem continues cal for a new DVR.
0
0
sj98ta
Tutor
•
4 Messages
10 years ago
The time is the first thing I checked, and it is right on the money with wwvb (atomic clock). I will try a couple other shows on a couple other stations, and see what happens.
0
0
db821arc
Scholar
•
86 Messages
10 years ago
One question. When you are recording two shows at the same time are you using 1 stream or 2 streams. The DVR lets you record up to 4 shows at one time. I just want to know if I am recording the 4 shows on the DVR will that use all my streams so I would not be able to watch TV until one of the shows finish recording.
Thanks for your help
0
0