So I have the uverse internet packaged with TV400.We have the 18-22mgps internet.We were not informed what UVERSE actually was and when they installed their equipment was told that NO!!! you cannot use your fancy new router you bought to maximize speed and minimize connection issues. There are three

NVG589 Broadband 1 flashing red for 3 weeks. Before that, all lights were solid green and both lines showed as "up". I did a complete reset and power cycled...no change. Tried all troubleshooting suggestions from ufix. Issue not resolved. Status log below. Any suggestions? DSL Status  Line 1 Line 2 

In remote environment, need to use MacBook to access files in my MyCloud from Western Digital. To do so, I created two (2) NAT/Gaming Services for port 80 and 443. Port 80 created and tested to be open using YouGetSignal.com. When testing with  YouGetSignal.com and other port checkers

AT&T has been purposely over billing customers, while also purposely making it difficult or impossible to contact any sort of support, while actively slowing down or impeding usage of their app and website. Phone calls to support are purposely disconnected anytime you get near a resolution. They

I can't figure out how to have a Open NAT type instead of Moderate.  I have seen other threads on how to open NAT type for Xbox and PS4, but haven't seen any for PC gaming.  I'm trying to play BO3 it stays at moderate.  On the game is says it tried accessing a port but was unsuccessful.  I tried fol

fredHi Everyone, I would be grateful if someone could have tell me what ports AT&T will actually route through an NVG589 to a service in my business so I can re-establish remote access to the computers at our family business as the way I was doing remote access using port 22 was blocked by AT&T rece

My AT&T U-Verse Wifi modem (NVG589) will not connect to my Playstation 4. Ive tried, read and watched multiple things and nothing has seemed to do the trick to fix it. It is currently saying that my Playstation 4 cannot obtain an IP address and NAT Type. (I've been manually typing different things t

Is it possible to backup the settings on my NVG589 gateway? If so, how?

I have followed the instructions as suggested on https://forums.att.com/t5/Features-and-How-To/How-to-put-the-Motorola-NVG589-in-bridge-mode-or-as-close-as-you/m-p/3552057#M39255as well as some of the alternative setups people have suggested in replies but I am unable to get any connection through m

There was graffiti sprayed on this box then covered up with a scribble of red paint (not the beige color of the utility box). I would like to make this red paint scribble into a tree painting OR I would like it to be painted to match the box. (Kansas)

Alright so I have had 2 technicians come out and look at it. The NVG589 resets every day at about 8pm along with a reset earlier in the day while I am typically at work. The first tech cleaned the connections by the street off and checked/doublechecked the connection to my house. The second tech swi

Ethernet wired from outside phone box to Gateway then to each set top box. Both TV's go black, pixelate, no sound or voice. This happens on more than one channel. I have used Troubleshoot/Resolve. Shut off power to Gateway and set top boxes, pressed resets. This will clear up problems for a short ti

I just upgraded my service to Internet 100 from 45 and received a new BGW210 router.  I would like to extend my network wifi coverage to my garage, and want to set up the NVG 589 as a repeater/extender/2nd access point.  Can this be done? Would setting up the NVG 589 as a bridge accomplish this? htt

We have 3 TVs: living room, basement, upstairs bedroom.   The router/modem/Gateway is in the basement and has been there for the last 7 or 8 years.  The TV in the living room works pretty consistently -- some pixelation, some unknown pauses, but liveable...    The upstairs

Hi, I'm hoping someone can help me with this. I installed ATT Uverse (TV and Internet) after rewiring home with Cat6 cables. At the time of installation the technician stripped the Cat6 cable coming from outside (NID?) and used 2 out of the 4 pairs of cables and connected these to an ATT Broadband w

We upped our Uverse Internet speed last week and replaced the reliable old 2Wire RG with this new ARRIS device. Initially, all speed tests showed around 48MBPS, which is what we're paying for. Last night, could barelly get connected (via WiFi) but finally did, but only thorugh an upstairs access poi

Wanted to check if anyone is aware of the security bulletin released about the hard coded back door accounts discovered on the NVG589 modems?  These back doors can be used to access and compromise your modem/gateway.  Are AT&T and Arris planning to release a fix or update to correct this issue?

So I have moved and they took my old gateway and replaceed in with the Motorola I believe NVG589 and so Far I hate it. I Have multiple devices and connect both wireless and wired, but Im just getting so many problems with connectivity and NAT issues. Long story short can I lease a PAce 4111N and wil

I've been using my SmartThings Hub for several months with no problems.  Recently, it has been going offline (solid blue light) with great frequency. It also sends me notifications each time it goes offline or back online.  Smart Things support suggests that I should open ports 9443, 443, & 39500. 

So due to the china virus, my wife and I opted to do distant learning with our children in our school district. I have a Version phone, and my wife has a pre-paid AT&T phone and she gets the best service in our rural location, so we opted to go with AT&T wireless internet service. a couple o