Hello, In the front of a house near the drive way these are the AT&T communication boxes (3 of them). See the picture. Do these green AT&T communication boxes in front of the house radiate wireless frequencies ? What is the purpose of these boxes ? Are these supposed to provide some ki

Our power went out in the middle of a thunderstorm and when it came back on Wi-Fi did not work. Rebooted the box and it is still not working. How do I fix this?

Following instructions on line and after several tries on the phone they said you cannot do this. First is what my device tells me i need... 2nd is what i have set on the router, switching the numbers doesn't work either any ideas?

Hi, I have following settings on my bgw210-700 IP Passthrough Allocation mode - passthrough passthrough mode - dhcp fixed passthrough fixed mac address - AA:BB:CC:DD:EE:FF (netgear orbi's Internet port mac address.) Home Network Status Device IPv4 Address 192.168.2.1DHCPv4 Netmask 255.255

Have seen several tips on this. All I did was turn off the internal WiFi, then connected the eero system with no issue. Is there a need for the IP pass through? Am I missing out on something?

With the virus going around, I would like to avoid the technician coming in to install, if possible.Can I request a self-install toolkit and install fiber myself or is the install too complex?I already have an "ofs" box in my apartment with a green fiber cable in it.

I'm hoping one of the knowledgeable installers can help me get an idea of what is possible for a new fiber installation. The web tool says we can get "Internet 1000", which I am assuming means fiber.We rent, and the landlord isn't thrilled about the idea of us getting fiber installed, partially for

I want to switch to fiber. I checked AT&T's website and my building is wired for Fiber 1 Gb/s, but I was worried about the installation process.I live in a 3 story condo building with front and rear units on each floor. I live in a front unit on the 3rd floor. A resident in the building already

I would like to know when fiber internet will be on my street. There are people 2 streets over that currently have fiber internet. I am paying the same amount for 10m dsl that they are paying for 300m fiber. There seems to be no rush to get fiber to customers like myself.

I have called every number I can find in this forum with 0 help, over 25 transfers to the "correct" department. And it's getting to the point where I'm going to just file it with the BBB.  I'm posting here as a last ditch effort to avoid any more headache. ATT is installing fiber in our sub

My BGW320-505 gateway is in passthrough mode connected to a managed firewall/router for my LAN. I've enabled Guest Wi-Fi on the gateway for access to the Internet but not to my LAN. The AT&T Smart Home Manager cellphone app shows that Guest Wi-Fi is enabled (button on right and shows green) on t

If I have UVerse TV disconnected, can I return the PACE 5268 gateway (router) along with two receivers (one for a small non-internet ready TV with a coax only antenna connection, and the other with a DVR?)  I'm mostly watching streaming channels through Roku.  Are there routers or adapters for TVs w

I live in a rural area. AT&T dug up our street to run a fiber line through my area with a manhole access at the end of my driveway. They finished April 2018. I would like to know if fiber is going to be installed at my house. How can i get a technician or something to get out to my house and verify

Hi everyone! Is there precedence for consumers paying ATT to install Fiber in a neighborhood that doesn't currently have it? During our consideration for a city we want to move to we're finding fiber availability hit and miss in some of the older neighborhoods. Can we pay ATT to install fiber to a h

When I move the ATT Wifi Extender closer to the side of the house where my outdoor security cameras are it tells me that it is too far from the gateway to connect. I have a hardwire location on that side of the house, can I just leave the extender hardwired and get it to broadcast that way? This ext

Hey all. First post here. I just moved and in my new home, I have ATT Fiber 500 Mbps, with the BGW320 router/modem. I’ve also got the Deco S4 mesh system. I used this same system at my previous home, which had the identical ATT modem model/Fiber service (except it was 1Gbps there). The mes

I do NOT have any external IPs. I do have my own internal DHCP. I was able to put the BGW320-500 in Passthrough and that is all good. Everything works fine. However, the only way this works is if the WAN side of my firewall pulls internal DHCP from the BGW320-500.  Is there no way, to

Hi,Where should I look to find the underground conduit requirements for a single family home drop, for AT&T fiber, from the above ground pole to the house ONT?I currently have an aerial telephone drop from the pole to my NID on the side of the house. The run is approximately 100 feet.I want to get f

I have a dynamic dns service that runs on my router (ASUS RT-AX86U) which needs to have the proper public IP in order to work. So I setup my BGW320-500 in IP Passthrough to the router and disabled the Wifi on the BGW.  My router obtained the public IP as expected and everything was working fin

Hello I have currently internet 300 with a ATT router. I see it would be cheaper for me to upgrade to internet 1000 but I do not want people to come into my home during the coronavirus pandemic.Would I need a new installation if I upgrade or is my current router enough?