So I live in an apartment and I have to deal with a problem of having my DSL Jack and DSL Filter across the room in the kitchen and I really want to use an ethernet cable. To gain ethernet connection, I'd have to move my HEAVY PC to the kitchen and use ethernet, going back the forth from my desk to

I'm wanting to add a few more ports to my uverse NVG510 router and I'm not sure as to what equipment I need to do this.  I believe an ethernet switch would do the trick?  I've noticed that AT&T has a "Netgear 8 port gigabit ethernet desktop switch - is this what I need?  If it helps I'm basically wa

I read where it said in the forum that all you have to do is run cat5e cable, plug in and turn off accesspoint, is this the vap2500? Then reset receiver to search for another connection. Also what happens when you turn the access point back on for Wi-Fi and another wireless receiver? Just trying to

Hello, Is it possible to plug a printer into the gateway using USB (preferably) or Ethernet and have it show up as a print device on my UVerse home network? If so, please give any instructions on Trusts/Firewalls, etc. Right now it is shared throught a windows share on a desktop upstairs that I'd li

I have a 2-wire 802.11b/g gateway connected to a wired u-verse DVR and a u-verse WAP for the wireless receivers.  I then have 2 wireless receivers.  One of the receivers I use wirelessly, but the other is connected via ethernet because its primary location is very far from the WAP.  Both receivers a

Will the wireless receiver work as well if the WAP is connected to the Ethernet cable coming from the wall as it will if the WAP is connected to an Ethernet port on the router? Will it still work "wirelessly"?

I recently ordered the wireless receiver. In looking at the Gateway router, I see there are no open ethernet ports. How do I connect using a hub?  Or, will it work if I connect it to the ethernet cable that is currently connected to my "wired" receiver?

Good morning, I hope you have a few seconds to help me with this issue. .  I moved into an apt and have AtandT fiber. I was hoping to plug in an ethernet cord into it as I used to with my comcast modem, however I couldn't find the modem. I found it in the back of my closet finally, it had been secur

Old:  DSL with 4 ethernet-attached devices, all working fine.  New: Pace 5268AC gateway.  Plugged in the same 4 devices - two worked and two failed.  Both of the failed devices say "Network cable unplugged."  They fail in different ways. HP desktop w/Win 7 and a Realtek PCIe GBE Family Controller LA

In an effort to attain a more consistent experience with Uverse in my bedroom (even though it shows 5 green bars I have pixelation, freezing and some complete disconnects) I am looking at options to bring ethernet into my room. I have been looking at Power Link options (using electrical outlets to c

I have 2 U-Verse wireless receivers that get a poor signal resulting in bad reception, and unfortunately, moving the WPS receiver is not an option. Since the wireless receivers do have an Ethernet port, can I just plug them directly into the wall jack or network switch to utilize a wired connection?

I have been having a lot of issues with our ATT provided router recently. Whenever I try to use my phone over WIFI it constantly buffers, takes forever to load, and sometimes I have to completely shut off the WIFI and just use our data. My PC (In the exact same room that I am using my phone in, not

Hi everybody, I have been looking for a way to make a 1TB USB3 external hard drive of mine into a network drive that anyone on my home network can access. I don't need anything fancy, I just want to be able to map the drive on multiple Windows devices simultaneously. What's the best way to do this?

Wireless gets interrupted on laptop and phone when ethernet light is out.

I am a Uverse Gigabit customer.  I have a CAT5 home run (less than 100 feet in cable length)  connected to the Arriss BGW210-700 gateway and terminated on a RJ45 jack located at the other end of my home.  I only have one ethernet connection at this location.  Can I plug a  a TP-LINK, TL-SG108E gigab

I have a 2wire 3801 and am trying to connect a Lutron SmartBridge to control lighting, etc. I am plugging the cable to all ethernet ports and it will not detect anything. What am I doing wrong?

I upgraded from internet 18 to 50 a few days ago, i connected the modem to a nighthawk since all the guys that came and work on the line said that it's better to connect to a dedicated router. For about a week the speed tested was within range but today the speed was different. I tried to test the s

I keep dropping my internet connection.  It turns out that I am no longer receiving DHCP IP addresses on Ethernet.  WiFi still works.  I have restarted my mac, and restarted the router a few times.  Works for awhile, and then loses DHCP. I thought that it was somehow related to the additional switch

Sorry for posting on the wrong section I posted this on Fiber by accident. I am not sure if I can post here, there seems to be no tech support forum.. and we were already delivered a new modem recently..no fix There seems to be an internet problem constant disconnecting, wired, wireless and on multi

I had u-verse internet installed last Friday (75 MB/s plan).  My house is new construction pre-wired for home networking and according to the AT&T installation procedure they are supposed to connect networked devices and at least one computer.  Basically, I needed the technicians to terminate one en