Has anyone tried using a Cisco 1800/2800 configured with an HWIC-1ADSL module to connect to the U-verse standalone Internet service, or will AT&T not allow anything other than their required gear? FYI, I am switching from AT&T DSL Pro to the U-verse Elite 6M service, purchasing the 2Wire 3600HGV dev

I need the volume louder on my TV. The volume works great with the DVD player.

I have worked out a way to simulate full bridged mode between a U-Verse RG and an enterprise grade router.   It's not identical to uverse in bridged mode, but it is pretty close.   Prerequisites: AT&T U-Verse VDSL service with the Static IP add-on. (I'll be using the 8-ip block in this case) A rout

I bought the DPH-154 yesterday and got it home, plugged it in and started the configuration, but the status webpage never got past "Power Up Pending", even after leaving it over night. Checking the DHCP server on the Cisco LRT214 (router with VPN tunneling so that I can access my home network when I

I got my static ip range today and was able to assign one of those IP Addresses to my 5505 ASA. When i try to establish my Site to site vpn with my Work 5520 ASA the IKE traffic does not appear to be making it back to my internal ASA on the newly assigned public IP's. All firewall options are off an

Hello -  I have a Cisco 3750 sitting behind an ATT 5031 NV.  The Cisco device has the following networks 'living' on it: 10.1.1.1 /2410.1.2.1 /2410.1.3.1 /24 All of these have DHCP pools living on the Cisco device.  The default gateway they had out is the IP of the SVI (mentioned above).  I am using

While speaking with AT&T customer service this morning about an unrelated wireless service upgrade, I was told that my house is eligible as of this week for Gigabit Internet/Uverse service[1]. The customer service rep mentioned the gateway would be a Cisco home/office gateway/router.  Does anyone kn

I'm trying to upgrade my powerline network in my home. The provided AT&T adapter is only 200mbps. (Model: SerComm IP532CG). I ran into trouble when setting up the new powerline adapters I bought. I did the reset process for all adapters but now one of the main adapters from AT&T can't be found on th

A couple of days ago, I came home to find my cable was out on the DVR receiver in the den.  I have a total of two boxes.  The other cable box in my bedroom is still working fine except for the fact that it doesn't link my recordings because the DVR box is messed up.  The CISCO ISB 7500 DVR receiver 

After rewinding a live TV broadcast and playing video stops (freezes). Is this caused by bad remote or badCisco control box ?

Hi I have UVerse with the 3801HGV Residential Gateway.  I want to conect a second router to the RG such as a Cisco Linksys N750 (EA3500), so that I can take advantage of the later's USB port for network-attached storage.   Not having much in the way of luck.   I've tried letting the connection manag

After multiple thunderstorms and multiple power failures, the microcell has the green power light and solid red 3g light illuminated. That is the only lights on. I reset the microcell and same thing. I unplugged all cords and waited 2 hours (I took a nap) before plugging back in. The same thing. So,

My situation: I work virtually from a home office in Milwaukee.  I have ATT U-Verse service.  ATT supplied me with an Arris NVG589 and Cisco VEN401-AT.  I have not had any issues connecting with my personal laptop, tablet, or cell phone to the Wi-Fi in my house.  My company sent me a new Toshiba Voi

Current level of internet service in my area is 18mbps. While I work from home through the Cisco Anyconnect software to VPN in to my work network, I have a severe drop off in performance. Speed tests off VPN are 18+, while connected to VPN they drop off below 1 mbps.Unable to find any guides on modi

I recently installed a Cisco 3800 Series Access point with an mGig port.  My issue is that the PACE 5268AC only sees it as a 100Mbps port and when I do a speed test from a wireless device I can't get any higher than 98mbps.  To answer your question, yes I have tried multiple end points and yes, they

Does anyone have a setup where you are using your own dual band 802.11 AC router and also have the ATT Cisco Wireless Access Point for the the Uverse wireless receivers? If yes, have you experienced any issues with the 5Ghz Wifi signal from the router? I am having some issues with 5 Ghz signal only

As the title says, I have a microcell attached to a centurylink c1100t dsl modem.   I've set up the port forwarding for 123/udp, 500/udp, 4500/udp as I saw was necessary. When I try to add 443/tcp, it says that port is already in use. I would expect that with the forwarding happening, it woul

I'm trying to have the devices on my home LAN connect to the Internet via my Cisco router that is connected to the regular U-verse Pace gateway as a cascaded router. The router can ping outside the LAN & the routing table contains the following entryS* 0.0.0.0/0 [254/0] via 192.168.1.254 along with

Hello,I have the DPH-154 connected to Netgear R6220 AC1200 Router connected to Spectrum (Time Warner) TM-1602 Cable Modem.The DPH-154 does not receive an IP address from the Netgear Router.If I enter the Admin screen for the Netgear Router it sees all my devices EXCEPT it does not see the DPH-154If

Long story short: I originally logged into the Cisco VEN501 and used that for the TV and a few other devices, but now I can't seem to login even after I reset the device. So, I wanted to know if I could use my Netgear (WNDR4300) router in place of the Cisco to use the 5G band for the TV receiver and