Pre-order the New Samsung Galaxy Z Flip4 & Galaxy Z Fold4 and, for a limited time, get twice the storage and a free case!
Troubleshoot your device issues
T

New Member

 • 

2 Messages

Tue, Jan 19, 2021 12:52 PM

DATAREMOTE 9070 WEB ADMINISTRATION PANEL ACCESS...

I have reset the device to factory settings (I assume as I followed the instructions to do so three or more times, and the led sequences indicated it worked)

The username / password for the web interface at 192.168.25.1 is not driadmin/DRIAdmin1 nor is it admin/Password1 nor is it -/attadmin nor is it admin/admin etc. I've tried every combination I found in your literature and every combination of the combinations. Shame on ATT for not providing PROPER documentation

I need to access the failover settings and many others. Product serial number is: 521723

The wifi ssid printed on the sticker on the device is the one it's broadcasting, however the password printed on the sticker is not correct.

I need to know the actual password to the web interface which is restored when the device is restored to factory settings. 

I need to know where I can download the most recent firmware for this device as well as the procedure for flashing it.

I do not have a proof of purchase as I bought it from Kyle, in his garage, at 4AM.

Thank you.

Accepted Solution

Official Solution

ATTHelp

Community Support

 • 

196.3K Messages

2年前

Hi @tta, we are happy to help.

 

Please refer you concerns to the manufactures user manual for the CDS-9070 router.

 

Do you have services with AT&T POTs services?

 

If you have any additional concerns, please feel free to reach out to us. Thank you for contacting us on AT&T Community Forums!

 

Lafayette, AT&T Community Specialist

New Member

 • 

2 Messages

2年前

Please refer to my post to find what my concerns are, and what I've done so far, (which in this case includes reading the "manufactures" manual for this device and following the steps outlined therein pertaining to my goal of accessing the administration panel by way of resetting the device to factory state.).

Having POTService is not a condition of accessing the admin panel or utilizing the device's other features, correct?

No I don't have "services with AT&T plain old telephone service services". Why have you asked this question rather than answering the ones I've asked.

This "reply" where you have ignored my questions and referred me to the manual (which I'm already thoroughly familiar with) is hardly an acceptable answer.

New Member

 • 

1 Message

1年前

I'm having the exact same issue and it would be really nice to figure out what is going on with this

New Member

 • 

1 Message

1年前

Is there a hard reset that can't be disabled in the firmware for this device???

Performing the hardware reset button doesn't function, ie, the device remains the same,

we would like to add a second sim for failover.....a little help please 

New Member

 • 

2 Messages

1分前

Not sure why, But AT&T has Locked down these devices so that NOBODY has access. It is very strange considering no other provider that uses these lock them down. What is AT&T hiding? So the 20 I ordered were going to be returned but AT&T don't even want them back! I was told to throw them away! Interesting!!!

Need help?
Fix, replace or check device delivery
New to AT&T Community?
New to the AT&T Community? Start by visiting the Community How-To.
New to the AT&T Community?
Visit the Community How-To.