Pre-order the New Samsung Galaxy Z Flip4 & Galaxy Z Fold4 and, for a limited time, get twice the storage and a free case!
S

New Member

 • 

5 Messages

Mon, Jan 31, 2022 6:09 AM

Using thermostat without digital life

Our thermostat seems like it has been set "automatically" since we cancelled our digital life system.  Are we not able to set the thermostat  ourselves without having the digital life service? If we can set without digital life, how do we do it?  We can't even raise the temperature in our own home.

Thanks for any input. 

Accepted Solution

Official Solution

Community Support

 • 

6.9K Messages

6分前

Hello,

The thermostat will always run a program so it is best that you change it to settings that are more comfortable for you. I pulled information from the manual that will help you set a program that better suits you. 

Your thermostat comes pre-programmed with preset temperatures for different times of the day.

  1. Heat - Runs when you have the heat on.
  2. Cool - Runs when you have the AC on.

These programs will always run but If they do not fit your needs, you can always input a custom program. If you manually change the temperature, it will revert back to the program above at the designated time.

 

TO CHANGE THE PROGRAM: (The HEAT program and the COOL programs are separate.)

  1. Make sure the thermostat mode is set to either HEAT or COOL
  2. Touch MENU then touch PROGRAM. This puts you at the PROGRAM screen 
  3. PROGRAM SCREEN:
  4. The programmed start time is displayed in the upper left. The TIME SLOT icon indicates the active TIME SLOT in the default program [MORN, DAY, EVEN, NIGHT].
  5. The programmed Target Temperature is shown on main display.
  1. Select the day you want to program.
    1. The day of the week starts at SU - Sunday and can be advanced to the day you want to program.
    2. Touch the day of the week area to cycle through the days of the week to the desired day. The HOLIDAY is at the 8th day position and has two time slots.
  2. Select the time slot (period) you want to program (MORN, DAY, EVEN, NIGHT).
    • Touch the time slot area to cycle through to the desired period.
  3. Select the desired start time of that time slot.
    • Touch the time arrows to select the desired period’s starting time. Hold arrow down for fast time scrolling.
  4. Select the desired target temperature for that time slot.
    • Touch the +/- arrows to select the desired period’s temperature.
  1. To COPY one day’s programming to the next day, touch COPY DAY once.
    • The information for the current day will be copied to the next day which will appear on the screen.
  1. Holding down COPY for over 3 seconds will copy to all 7 days.

 

Touch the HOME ICON to return to the Home screen.

  

TO MANUALLY CHANGE TEMPERATURE:

  1. Touch the +/- arrows to select your desired Target Temperature. This temporary change in target will revert to the programmed target at the next time slot .
  2. Touch HOME to return to operation.

I realize this is quite a bit to get your thermostat working with the ease of Digital Life but it does work. 

(edited)

Accepted Solution

Community Support

 • 

6.9K Messages

18日前

Hello,

 

I found the programming instructions here: Link to CT-50 Programming

 

I hope this will help you adjust the programming. 

Community Support

 • 

6.9K Messages

6分前

You can control your system temperature by using the thermostat. you do not need Digital Life to manually control your thermostat.

New Member

 • 

5 Messages

6分前

Thank you for the response. The problem seems to be that we cannot get it off program.  And we cannot raise temp more than 70 degrees. If  we try, it jumps back down to 62. If we can get it out of programs, I think it would work. How do we do that?

Community Support

 • 

6.9K Messages

6分前

Which thermostat do you have? 

New Member

 • 

5 Messages

6分前

This is a picture of our thermostat. I see no name or anything.

Community Support

 • 

6.9K Messages

6分前

Good Morning,

 

Thank you for the picture of your thermostat. I'm checking into what may be causing this issue so you can control your temperature. 

 

* VERY IMPORTANT:

Has your Digital Life System's main controller been disconnected from all power or uninstalled?

New Member

 • 

5 Messages

6分前

This is one of the strangest things I have ever seen! Last night I was able to raise the temperature and it stayed till this morning where it automatically dropped back down to 62. It still says "temporary" at the bottom of thermostat. 

As for your question, I don't know.  I assume so since we stopped DL monitoring? How do I know for sure? 

I REALLY appreciate you trying to help  with this. 

Community Support

 • 

6.9K Messages

6分前

Hey there,

I am reading the manual at this moment and I believe I have found the cause. The thermostat comes pre-programmed from the factor and runs a program automatically. And guess what that program does at 8am each morning...Yep, you guessed it, it returns the temperature to 62 degrees.

There is a way to reprogram it but I am trying to find a way to simply turn off the programming so it will remain at whatever temperature you select.

Give me a little while and I will see what I can find for you. 

New Member

 • 

5 Messages

6分前

This seems to have worked. Thank you SO much!

Community Support

 • 

6.9K Messages

6分前

My Pleasure. I'm glad it worked. Have a wonderful day.

Wiegand

New Member

 • 

20 Messages

6分前

The new setting will be maintained until the time shown under Hold Until. When the timer.expires, the schedule will resume, and the temperature will return to the setting for the current time period.

New Member

 • 

2 Messages

21日前

Do you know what is causing the thermostats to start running this program after Digital life has been cancelled?

Community Support

 • 

6.9K Messages

21日前

@alaplaca76 

Do you know what version and model thermostat you have? 

Your thermostat may be running an internal program specific to the thermostat. 

New Member

 • 

2 Messages

19日前

It is the Gen 2 CT50 Radio thermostat. I believe that it is running the internal program you mentioned.

Need help?
New to AT&T Community?
New to the AT&T Community? Start by visiting the Community How-To.
New to the AT&T Community?
Visit the Community How-To.